Find Gas Soft Seated Gate Valve, Gas Resilient Seated Gate Valve, Gas Sluice Valve on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Pure Nickel Bar > Gas gate valve

Gas gate valve

  • Gas gate valve
  • Gas gate valve
  • Gas gate valve

Gas gate valve

    Min. Order: 10 Piece/Pieces
    Packaging: Plywood box
    Productivity: 20000 PCS/YEAR
    Brand: OEM
    Transportation: Ocean,Air
    Place of Origin: China
    Supply Ability: 20000PCS/Year
    Certificate: ISO9001
    HS Code: 8481804090
    Port: Shanghai

Basic Info

Model No.: RZ49

Product Description

valve for non-rising stem seal gate valves of the elastic base seat wedge type single ram, using direct channel structure. Dark stem design, the valve has the remarkable installation space small feature;
ram as ductile iron skeleton + high-performance rubber, EPDM, advanced plastic injection molding technology and mature vulcanization process. The adhesive strength, tensile strength and resilience of the rubber are guaranteed, and the rubber after vulcanization has no defects such as bubble, crack and dew iron. Its binding strength meets the requirements of DVGW, and it will never fall off even if subjected to frequent extrusion stress. The bonding strength shall not be lower than 1.725mpa when measured according to GB/T 11211 standard. Make sure that the gate plates are interchangeable and the valve can be operated with low torque for sealing effect.
gate on both sides of the guide rail with wear-resisting non-toxic engineering plastic (nylon), and gate valve is firm, good appearance, can accurate orientation, and greatly reduces the valve opening and closing torque;
high strength and high precision rolling stem, self-locking performance is good, and the stem nut and flexible shaft sleeve with precision, to ensure that the valve torque is extremely low, each parts material and the machining precision can ensure valve twice in the overload torque under the action of (according to EN1074.2) without any obvious damage, has the characteristics of high life;
gate seal USES three type O sealing ring seal, has the advantages of infinite (no pollution, small torque). The ultra-high surface finish of the stem ensures that the service life of the stem o-ring is five times longer than the normal process (stem machining).
stem nut cooperate closely with the ram, and to ensure that sufficient degrees of freedom, make instant valve open/close damper under the action of water pressure free adjustment, thoroughly overcome the bending stress due to the deflection deformation under the action, and can greatly reduce operating torque, increases the service life of the valve;
contact seal for spherical sealing face of the upper gate line, contact area is lesser, open/close the valve and out of the sealing surface of short time, reduce the valve operating torque, and achieve the best sealing effect. In the sealing test, there is no structural damage to the gate plate. The base of the gate plate is changed from the domestic single seal to the double bar line seal, which effectively prevents the gate plate's axial swing under the action of water pressure, enhances the sealing performance, and can achieve two-way "zero leakage".
jacket type rubber seal gate valves leading global modular design, can be realized with pressure change on sealing ring, without removing the valve from the piping is replaceable parts, do not remove the valve cover is easy to replace the valve stem, bring a lot of convenience to very case maintenance;
DIN3354 Pn16 Double Flange Gate Valve with Handwheel
DIN3354 Pn16 Double Flange Gate Valve with Handwheel

Gas Gate valve

A basin-wide and straight-through design with the concave cavity of no flowing stagnation is applied at the bottom of the soft sealing gate valve in the company so as to guatantee the smooth of the fluid body without secondarily polluting the media.

The wedge is sealed with resin according to CJ/T3055. It can achieve no linkage when the valve is closed.

Of the stem where need sealing apply multiway sealing rings of “O” type, which prolongs the valve’s service life. The stem uses 2cr13 Stainless Steel. The nut is made of austenitic ductile iron which contains high nickel. No bronze is applied in any part of the valve.

The gas valve is equipped with sophisticated indicating device which shows the opening degree

Applying areas:

Pure gas pipes fixed in metallurgy, power station, gas supply system and other industries.



Suzhou Yueda Valve Co., Ltd. is a professional valve manufacturer in China and focus on providing customers with one-stop procurement services.

The company mainly produces various types of valves for water industrial uses which include cast iron and ductile iron gate valve, butterfly valve, check valve, air valve, ball valve, strainer, valve accessories. We provide both types of metal to metal seat and resilient seat and FBE coating with the requirements of international sanitary standard. All Yueda company's products are designed and manufactured and tested according to international standards.

The company has promising professional strength of mechanical technique and many professionals of valve industry; moreover, the quality of products is excellent and stable.

The company's products are exported to Western Europe, South Africa, North America and the Middle East and other countries. With good quality, thoughtful service and high reputation, the company accesses to a vast number of users. Via introducing ISO9001: 2000 quality management system and actively applying scientific management means, the company energizes for new development and lays a solid foundation.

The company bases on the belief [credit first, customer supreme" and views product quality as the lifeline, dedicating to provide users with the best services. Considerate, pragmatic, pioneering and innovative, the company relies on more and better products to express appreciations to the society's care. We are looking forward to a win-win cooperation with you.

Company Info

  • Company Name: SUZHOU YUEDA VALVE CO., LTD.
  • Representative: DINGMEI
  • Product/Service: Gate Valve , Butterfly Valve , Check Valve , Air Valve , Penstock Valve , Spindle Valve
  • Capital (Million US $): US$5 Million
  • Year Established: 2008
  • Total Annual Sales Volume (Million US $): US$5 Million - US$10 Million
  • Export Percentage: 91% - 100%
  • Total Annual Purchase Volume (Million US $): US$5 Million - US$10 Million
  • No. of Production Lines: 3
  • No. of R&D Staff: 11 -20 People
  • No. of QC Staff: 21 -30 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 10,000-30,000 square meters
  • Factory Location: 2 Xinggong Road, dongkan Town, Binhai County, Yancheng City, Jiangsu Province
  • Contact Person: Mr. jack
  • Tel: 86-0512-66307937
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters