High 0cr23al5 Temperature and Fecral Resistance Alloy
Basic Info
Model No.: 0Cr23Al5
Product Description
Model NO.: 0Cr23Al5 Material: Fecral Resisivity at 20oc: 1.35 Ohm mm2/M Hardness: 200-260 Trademark: UALLOY Specification: GB/T 1234-2010 HS Code: 85149090 Product Type: Strip Carbon Content: Low Carbon Status: Soft,Bright Size: 0.05-0.1 Transport Package: Wooden Case, Wooden Pallet Origin: China Product Description
1. Pass: ISO9001 certification
2. Fine after-sale services
3. Small order accepted
4. Samples available
5. Short delivery time
Fe-Cr-Al resistance wires
FeCrAl heating wires and strips
Electrical resistance wire
Iron aluminum nickel alloy wires strips
FeCrAl Alloy wires and strips
FeCrAl wires and strips
1. Introduction to products
With the characteristics of high resistance, low coefficient of electric resistance, high operating temperature, good corrosion resistance under high temperature, as well as the lower price, it is widely used in industrial electric furnace, household electrical appliance and far infrared ray device.
2. Marking
Each spool/package of alloy is supplied with a label or tag showing alloy type, nominal size, tare and net weight, resistance W/m (W/ft), charge number and a reference number.
3. Size
Wires: 0.018-10mm Ribbons: 0.05*0.2-2.0*6.0mm
Strips: 0.5*5.0-5.0*250mm Bars: D10-100mm
4. Application
Our Products widely apply to chemical industry, metallurgy mechanism, glass industry, ceramic industry, home appliance area and so on.
Mechanical Properties
Temperature Factor of Electrical Resistivity
Contact us if you need more details on 0cr23al5 Heating Resistance Alloy Strip. We are ready to answer your questions on packaging, logistics, certification or any other aspects about FeCrAl Wire、Fecral Heating Alloy. If these products fail to match your need, please contact us and we would like to provide relevant information.
1. Pass: ISO9001 certification
2. Fine after-sale services
3. Small order accepted
4. Samples available
5. Short delivery time
Fe-Cr-Al resistance wires
FeCrAl heating wires and strips
Electrical resistance wire
Iron aluminum nickel alloy wires strips
FeCrAl Alloy wires and strips
FeCrAl wires and strips
1. Introduction to products
With the characteristics of high resistance, low coefficient of electric resistance, high operating temperature, good corrosion resistance under high temperature, as well as the lower price, it is widely used in industrial electric furnace, household electrical appliance and far infrared ray device.
2. Marking
Each spool/package of alloy is supplied with a label or tag showing alloy type, nominal size, tare and net weight, resistance W/m (W/ft), charge number and a reference number.
3. Size
Wires: 0.018-10mm Ribbons: 0.05*0.2-2.0*6.0mm
Strips: 0.5*5.0-5.0*250mm Bars: D10-100mm
4. Application
Our Products widely apply to chemical industry, metallurgy mechanism, glass industry, ceramic industry, home appliance area and so on.
C | P | S | Mn | Si | Cr | Ni | Al | Fe | Other |
Max | Max 0.60 | 22.5~24.5 | Max 0.60 | 4.2~5.0 | Bal. | - | |||
0.06 | 0.025 | 0.025 | 0.70 |
Mechanical Properties
Max Continuous Service Temp | 1250ºC |
Resisivity at 20ºC | 1.35 ohm mm2/m |
Density | 7.25 g/cm3 |
Thermal Conductivity | 60.2KJ/m@h@ºC |
Coefficient of Thermal Expansion | 15.0×10-6/ºC |
Melting Point | 1500ºC |
Tensile Strength | 637~784 Mpa |
Elongation | Min 12% |
Section Variation Shrink Rate | 65~75% |
Repeatedly Bend Frequency | Min 5 times |
Continuous Service Time | - |
Hardness | 200-260HB |
Micrographic Structure | Ferrite |
Magnetic Property | Magnetic |
Temperature Factor of Electrical Resistivity
20ºC | 100ºC | 200ºC | 300ºC | 400ºC | 500ºC | 600ºC | 700ºC | 800ºC | 900ºC | 1000ºC | 1100ºC | 1200ºC |
1 | 1.002 | 1.007 | 1.014 | 1.024 | 1.036 | 1.056 | 1.064 | 1.070 | 1.074 | 1.078 | 1.081 | 1.084 |
The allowable tolerance of alloy strip GB/T1234-2012 | ||||
Category | Thickness ( mm ) | Tolerance ( mm) | ||
Common precision | High precision | |||
Cold-rolled strip | 0.05 ~ 0.1 | ±0.01 | ±0.005 | |
0.1 ~ 0.2 | ±0.015 | ±0.01 | ||
0.2 ~ 0.5 | ±0.02 | ±0.015 | ||
0.5 ~ 1.0 | ±0.03 | ±0.025 | ||
1.0 ~ 1.8 | ±0.04 | ±0.03 | ||
1.8 ~ 2.5 | ±0.05 | ±0.04 | ||
2.5 ~ 4.0 | ±0.06 | ±0.05 | ||
Hot-rolled Strip | 2.5 ~ 5.0 | ±0.25 | ±0.2 | |
5.0 ~ 7.0 | ±0.3 | ±0.25 | ||
7.0 ~ 10.0 | ±0.4 | ±0.35 | ||
10.0 ~ 20.0 | ±0.5 | ±0.45 | ||
The allowable tolerance of alloy strip GB/T1234-2012 | ||||
Category | Width ( mm ) | Tolerance ( mm ) | ||
side cut | Nonside cut | |||
Common precision | High precision | |||
Cold-rolled Strip | 5.0 ~ 10.0 | ±0.2 | ±0.1 | -0.6 |
10.0 ~ 20.0 | -0.8 | |||
20.0 ~ 30.0 | -1 | |||
30.0 ~ 50.0 | ±0.3 | ±0.15 | -1.2 | |
50.0 ~ 100.0 | ±1.0 | |||
100.0 ~ 200.0 | ±0.5 | ±0.25 | ±1.5 | |
200.0 ~ 300.0 | ±1.8 | |||
Hot-rolled Strip | 15.0 ~ 60.0 | / | ±1.5 | |
60.0 ~ 200.0 | ±2.5 | |||
200.0 ~ 300.0 | ±3.0 |
Product Categories : FeCrAl Alloy
Premium Related Products
Other Products
Hot Products
Fesib Alloy Strip as Transformer Iron CoreThermal Spray Alloy Wire-Nial 95/5 (1.6mm, 2.0mm)Top Quality Type K Thermocouple WireStainless Steel Strip0cr25al5 Resistance Strip/Fecral Heating AlloyGood quality hollow copper rivet factory supplyChinese Fabrication Services turning partsSilver alloy wiresBrass copper strips factory supplySilver brass clad metal stripsSilver copper electrical contactslead frame material C7025copper alloy foilbrass name platenickel silver platebronze alloy properties