Find Heating Ribbon,Heater Strips,Heating Element on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Home > Products > FeCrAl Alloy > 0.1*8mm 0cr13al4 Heating Ribbon for Heater Strips

0.1*8mm 0cr13al4 Heating Ribbon for Heater Strips

Productivity: 
300tons/Year
Place of Origin: 
China
Supply Ability: 
300tons/Year

Basic Info

Model No.:  0cr13al4

Product Description

Model NO.: 0cr13al4 Material: Fecral PCD: 100mm Hole: 8 Max. Continuous Service Temp. of Element: 950 Chemical Composition: Cr 12-15% Al 4.0-4.56.0% Fe Balance Specification: ISO9001, ISO14001 HS Code: 72209000 Product Type: Wire Carbon Content: Low Carbon ET: 15mm Status: Bright,Oxidized.Acid White Resistivity at 20. C: 1.25+-0.08 Ohm mm2/M Trademark: Ualloy Origin: China FeCrAl alloys heating ribbon wire
1. Introduction to products
FeCrAl Alloy is a ferritic iron-chromium-aluminium alloy with high resistivity and has superior oxidation resistance for use at temperatures up to 1450 centigrade degree., as compared to other commercial Fe and Ni base alloy.

2. Application
Our Products are widely applied to chemical industry, metallurgy mechanism, glass industry, ceramic industry, home appliance area and so on.

3. Properties
Grade: 1Cr13Al4
Chemical Composition: Cr 12-15% Al 4.0-4.56.0% Fe Balance
Max. Continuous service temp. Of element(° C): 950degrees
Resistivity at 20. C(μ Ω @m): 1.25+-0.08 ohm mm2/m
The allowable tolerance of alloy strip GB/T1234-2012  
Category Thickness ( mm ) Tolerance ( mm)  
Common precision High precision   
  Cold-rolled strip 0.05 ~ 0.1 ±0.01 ±0.005  
0.1 ~ 0.2 ±0.015 ±0.01  
0.2 ~ 0.5 ±0.02 ±0.015  
0.5 ~ 1.0 ±0.03 ±0.025  
1.0 ~ 1.8 ±0.04 ±0.03  
1.8 ~ 2.5 ±0.05 ±0.04  
2.5 ~ 4.0 ±0.06 ±0.05  
Hot-rolled Strip 2.5 ~ 5.0 ±0.25 ±0.2  
5.0 ~ 7.0 ±0.3 ±0.25  
7.0 ~ 10.0 ±0.4 ±0.35  
10.0 ~ 20.0 ±0.5 ±0.45  
The allowable tolerance of alloy strip GB/T1234-2012
Category Width ( mm ) Tolerance ( mm )
side cut Nonside cut
Common precision High precision 
Cold-rolled Strip 5.0 ~ 10.0 ±0.2 ±0.1 -0.6
10.0 ~ 20.0 -0.8
20.0 ~ 30.0 -1
30.0 ~ 50.0 ±0.3 ±0.15 -1.2
50.0 ~ 100.0 ±1.0
100.0 ~ 200.0 ±0.5 ±0.25 ±1.5
200.0 ~ 300.0 ±1.8
Hot-rolled Strip 15.0 ~ 60.0 / ±1.5
60.0 ~ 200.0 ±2.5
200.0 ~ 300.0 ±3.0
 
The allowable tolerance of alloy wire and rod diameter GB/T1234-2102
Category Diameter(mm) Tolerance(mm)
Cold-drawn steel wire  0.02 ~ 0.025 0.02 ~ 0.025
0.025 ~ 0.03 0.025 ~ 0.03
0.03 ~ 0.05 0.03 ~ 0.05
0.05 ~ 0.1 0.05 ~ 0.1
0.1 ~ 0.3 0.1 ~ 0.3
0.3 ~ 0.5 0.3 ~ 0.5
0.5 ~ 1.0 0.5 ~ 1.0
1.0 ~ 3.0 1.0 ~ 3.0
3.0 ~ 6.0 3.0 ~ 6.0
6.0 ~ 8.0 6.0 ~ 8.0
8.0 ~ 10.0 8.0 ~ 10.0
Hot-finished rod 5.5 ~ 12.0 ±0.4

Contact us if you need more details on Heating Ribbon. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Heater Strips、Heating Element. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : FeCrAl Alloy

Email to this supplier
  • *Subject:
  • To:
    Bill Bi
    Mr. Bill Bi
  • *Messages:
    Your message must be between 20-8000 characters