0cr25al5 Heating Resistance Wire/Fecral Heating Ribbon

Model NO.: 0cr25al5 Material: Fecral Resisivity at 20oc: 1.4 ~1.45 Ohm mm2/M Thermal Conductivity: 46.1kj/M@H@Oc Trademark: UALLOY Specification: ISO9001, ISO14001 HS Code: 85149090 Product Type: Strip Carbon Content: Low Carbon Density: 7.10 g/cm3 Melting Point: 1500oc Transport Package: Water Proof Ribbon, Wooden Pallet, Wooden Case Origin: China Fecral Heating ribbon

1. Description
FeCrAl Alloy Strip: With the characteristics of high resistance, low coefficient of electric resistance, high
Operating temperature, good corrosion resistance under high temperature. It is mainly used in electric
Ceramic cooktop, industrial furnace.

2. Specification
1). Electric ceramic cooktop resistance strip:
Thickness: 0.04mm-1.0mm
Width: 5mm-12mm
Thickness&Width: (0.04mm-1.0mm)× 12mm(above)

2). Low resistance ribbon:
Thickness&Width: (0.2mm-1.5mm)*5mm

3). Industrial furnace ribbon:
Thickness: 1.5mm-3.0mm
Width: 10mm-30mm
4). Wire: Diameter: 0.05mm-10.0mm


3. Usage
It is mainly used in electric locomotive, diesel locomotive, metro vehicle and high speed moving ca, catalytic converter, brake system brake resistor, electric ceramic cooktop, industrial furnace etc.

4. Features
Stable performance; Anti-oxidation; Corrosion resistance; High temperature stability; Excellent coil-forming ability; Uniform and beautiful surface condition without spots.

5. Packing detail
1) Coil (plastic spool) + compressed ply-wooden case + pallet
2) Coil (plastic spool) + carton + pallet

6. Products and services
1). Pass: ISO9001 certification, and SO14001cetification;
2). Fine after-sale services;
3). Small order accepted;
4). Stable properties in high temperature;
5). Fast delivery;

C	P	S	Re	Si	Cr	Y	Al	Fe	Zr	Ti	Ca+Mn
Max0.04	Max 0.02	Max 0.015	0.3	Max 0.4	20	Max 0.1	5	Bal.	0.2	0.15	0.5

 
Mechanical Properties

Max Continuous Service Temp	1300ºC
Resisivity at 20ºC	1.4 ~1.45 ohm mm2/m
Density	7.10 g/cm3
Thermal Conductivity	46.1KJ/m@h@ºC
Coefficient of Thermal Expansion	16.0×10-6/ºC
Melting Point	1500ºC
Tensile Strength	637~784 Mpa
Elongation	Min 12%
Section Variation Shrink Rate	65~75%
Repeatedly Bend Frequency	Min 5 times
Continuous Service Time	-
Hardness	200-260HB
Micrographic Structure	Ferrite
Magnetic Property	Magnetic

Contact us if you need more details on 0cr25al5 Heating Resistance Wire. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Heat Resistance Coil、Resistance Strip. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : FeCrAl Alloy