0.6mm*60mm 0cr21al4 Heating Strip for Braking Resistor

Model NO.: 0cr21al4 Material: Fecral Size: 0.15mm-8mm Resisivity at 20 Oc: 1.23 Ohm mm2/M Trademark: ualloy Specification: ISO9001, ISO14001 HS Code: 7602000010 Product Type: Strip Carbon Content: Low Carbon Color: Bright Hb: 200-260 Transport Package: Wooden Case, Wooden Pallet Origin: China FeCrAl(0Cr21Al4) Heating Strip

1. Description
FeCrAl Heating Strip With the characteristics of high resistance, low coefficient of electric resistance, high operating temperature, good corrosion resistance under high temperature, it is widely used in industrial electric furnace, household electrical appliance and far infrared ray device.

2. Specification
Wire: Diameter: 0.15mm-8.0mm

Strip: Thickness: 0.6mm-3.0mm
Width: 5mm-250mm

3. Usage
FeCtAl Heating Alloy is mainly used in electric locomotive, diesel locomotive, metro vehicle and high speed moving car etc brake system brake resistor, electric ceramic cooktop, industrial furnace.

4. Features
The features of FeCtAl Heating Alloy are Stable performance; Anti-oxidation; Corrosion resistance; High temperature stability; Excellent coil-forming ability; Uniform and beautiful surface condition without spots.

5. Packing detail
1) Coil (plastic spool) + compressed ply-wooden case + pallet
2) Coil (plastic spool) + carton + pallet

6. Products and services
1). Pass: ISO9001 certification, and SO14001cetification;
2). Fine after-sale services;
3). Small order accepted;
4). Stable properties in high temperature;
5). Fast delivery;

Si	Cr	Ni	Al	Fe	Other
Max 1.0	18.0~21.0	Max 0.60	3.0~4.2	Bal.	-

Mechanical Properties




 

The allowable tolerance of alloy strip GB/T1234-2012
Category	Thickness ( mm )	Tolerance ( mm)
		Common precision	High precision
Cold-rolled strip	0.05 ~ 0.1	±0.01	±0.005
	0.1 ~ 0.2	±0.015	±0.01
	0.2 ~ 0.5	±0.02	±0.015
	0.5 ~ 1.0	±0.03	±0.025
	1.0 ~ 1.8	±0.04	±0.03
	1.8 ~ 2.5	±0.05	±0.04
	2.5 ~ 4.0	±0.06	±0.05
Hot-rolled Strip	2.5 ~ 5.0	±0.25	±0.2
	5.0 ~ 7.0	±0.3	±0.25
	7.0 ~ 10.0	±0.4	±0.35
	10.0 ~ 20.0	±0.5	±0.45
The allowable tolerance of alloy strip GB/T1234-2012
Category	Width ( mm )	Tolerance ( mm )
		side cut		Nonside cut
		Common precision	High precision
Cold-rolled Strip	5.0 ~ 10.0	±0.2	±0.1	-0.6
	10.0 ~ 20.0			-0.8
	20.0 ~ 30.0			-1
	30.0 ~ 50.0	±0.3	±0.15	-1.2
	50.0 ~ 100.0			±1.0
	100.0 ~ 200.0	±0.5	±0.25	±1.5
	200.0 ~ 300.0			±1.8
Hot-rolled Strip	15.0 ~ 60.0	/		±1.5
	60.0 ~ 200.0			±2.5
	200.0 ~ 300.0			±3.0

Max Continuous Service Temp	1100ºC
Resisivity at 20ºC	1.23 ohm mm2/m
Density	7.35 g/cm3
Thermal Conductivity	46.9 KJ/m@h@ºC
Coefficient of Thermal Expansion	13.5×10-6/ºC
Melting Point	1500ºC
Tensile Strength	637~784 Mpa
Elongation	Min 12%
Section Variation Shrink Rate	65~75%
Repeatedly Bend Frequency	Min 5 times
Continuous Service Time	-
Hardness	200-260HB
Micrographic Structure	Ferrite
Magnetic Property	Magnetic

Contact us if you need more details on 0cr21al4 Heating Strip. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Heating Strip、Electric Heating Strip. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : FeCrAl Alloy