Good Quality 0cr13al4 Heating Resistant Flat Wire Fecral Alloy Resistor

Model NO.: 0cr13al4 Material: Fecral PCD: 100mm Hole: 8 Chemical Composition: Cr 12-15% Al 4.0-4.56.0% Fe Balance Resistivity at 20. C: 1.25+-0.08 Ohm mm2/M Transport Package: Wooden Case, Wooden Pallet Origin: China Product Type: Wire Carbon Content: Low Carbon ET: 15mm Status: Bright,Oxidized.Acid White Max. Continuous Service Temp: 950degrees Trademark: Ualloy Specification: GB/T 1234-2010 HS Code: 85149090 Good Quality 0cr13al4 Heating Resistant Flat Wire FeCrAl Alloy Resistor
1. Introduction to products
FeCrAl alloy is a ferritic iron-chromium-aluminium alloy with high resistivity and has superior oxidation resistance for use at temperatures up to 1450 centigrade degree., as compared to other commercial Fe and Ni base alloy.

2. Application
Our Products are widely applied to chemical industry, metallurgy mechanism, glass industry, ceramic industry, home appliance area and so on.

3. Properties
Grade: 1Cr13Al4
Chemical Composition: Cr 12-15% Al 4.0-4.56.0% Fe Balance
Max. Continuous service temp. Of element(° C): 950degrees
Resistivity at 20. C(μ Ω @m): 1.25+-0.08 ohm mm2/m

The allowable tolerance of alloy strip GB/T1234-2012
Category	Thickness ( mm )	Tolerance ( mm)
		Common precision	High precision
Cold-rolled strip	0.05 ~ 0.1	±0.01	±0.005
	0.1 ~ 0.2	±0.015	±0.01
	0.2 ~ 0.5	±0.02	±0.015
	0.5 ~ 1.0	±0.03	±0.025
	1.0 ~ 1.8	±0.04	±0.03
	1.8 ~ 2.5	±0.05	±0.04
	2.5 ~ 4.0	±0.06	±0.05
Hot-rolled Strip	2.5 ~ 5.0	±0.25	±0.2
	5.0 ~ 7.0	±0.3	±0.25
	7.0 ~ 10.0	±0.4	±0.35
	10.0 ~ 20.0	±0.5	±0.45
The allowable tolerance of alloy strip GB/T1234-2012
Category	Width ( mm )	Tolerance ( mm )
		side cut		Nonside cut
		Common precision	High precision
Cold-rolled Strip	5.0 ~ 10.0	±0.2	±0.1	-0.6
	10.0 ~ 20.0			-0.8
	20.0 ~ 30.0			-1
	30.0 ~ 50.0	±0.3	±0.15	-1.2
	50.0 ~ 100.0			±1.0
	100.0 ~ 200.0	±0.5	±0.25	±1.5
	200.0 ~ 300.0			±1.8
Hot-rolled Strip	15.0 ~ 60.0	/		±1.5
	60.0 ~ 200.0			±2.5
	200.0 ~ 300.0			±3.0

 

The allowable tolerance of alloy wire and rod diameter GB/T1234-2102
Category	Diameter(mm)	Tolerance(mm)
Cold-drawn steel wire	0.02 ~ 0.025	0.02 ~ 0.025
	0.025 ~ 0.03	0.025 ~ 0.03
	0.03 ~ 0.05	0.03 ~ 0.05
	0.05 ~ 0.1	0.05 ~ 0.1
	0.1 ~ 0.3	0.1 ~ 0.3
	0.3 ~ 0.5	0.3 ~ 0.5
	0.5 ~ 1.0	0.5 ~ 1.0
	1.0 ~ 3.0	1.0 ~ 3.0
	3.0 ~ 6.0	3.0 ~ 6.0
	6.0 ~ 8.0	6.0 ~ 8.0
	8.0 ~ 10.0	8.0 ~ 10.0
Hot-finished rod	5.5 ~ 12.0	±0.4

Contact us if you need more details on Fecral Alloy Heating Resistance. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Fecral Alloy Heating Wire、Fecral Electric Alloy Resistance. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : FeCrAl Alloy