Thermal Break Powder Coated Aluminum Windows Profiles

0.8-2.0mm Thickness Thermal Break Aluminum Windows Profiles Powder Coated Surface 6063 T5 OEM

Advantages of Thermal Break Aluminum Material:

The principle of heat insulation bridge breaking aluminum alloy is to insert heat insulation strip in the middle of aluminum profile, and break the aluminum profile to form a bridge break, which effectively prevents heat conduction. The thermal conductivity of the doors and windows of the insulated aluminum alloy profiles is 40-70% lower than that of the non insulated aluminum alloy doors and windows
The advantages of bridge breaking aluminum
1. The insulation of bridge breaking aluminum is good. The soft combination of inner and outer frames of insulated profile is adopted. The frame adopts three sealing forms of one rubber strip and double wool strip, which is closed tightly, air tight and water tight, and has excellent heat preservation performance; The window sash adopts hollow glass structure, which makes the window truly show sound insulation, heat insulation, heat preservation and excellent function, saving a lot of heating and cooling costs. The heat transfer coefficient K value is less than 2.23-2.94w/ ㎡ · k after the detection, and the energy saving effect is remarkable. The energy saving cost in several years is enough to make up for the investment in the early stage.
2. Bridge breaking aluminum waterproof function. The structure drainage system is designed by using the principle of pressure balance. The inclined ladder type is designed for the sliding design. The drainage port is set, the drainage is smooth and the water tightness is good.
3. Bridge breaking aluminum is anti condensation and frost proof. The bridge breaking aluminum can realize the three sealing structure of doors and windows, reasonably separate the water vapor cavity, achieve the balance of gas and water pressure, improve the water tightness and air tightness of the doors and windows significantly, and achieve the effect of window clear and bright.
4. Design of aluminum mosquito screen window for bridge breaking. Invisible screen window, can be installed and used internally and externally. It has mosquito prevention and flies, especially suitable for the northern area with multiple mosquitoes.
5. Bridge breaking aluminum anti-theft and anti loose device. With unique multi-point hardware lock, ensure the stability and safety of windows in use.

Profile Specification:

Description	Thermal Break Aluminum Standard Extrusion Profiles With Strip 6063 T5 OEM
Material Thickness	0.8-2.0 mm
Materiral	aluminum alloy 6063
Annealing Treatment	T3-T8
Color	Silver White ,Bronze , Champagne, Black,( 60179289,RAL series)etc.
Surface Treatment	anodized, powder coated, electrophoresis, wood grain, polished and etc
Shape	Square, Round, Flat, Oval, and according to customer's drawing.
Length	Normal length=6m or in customer's order
Usage	Building, Production Line, Decoration, Industrial, Transportation, Door and window, etc.
Package	1. Pearl cotton foam for each profile; 2. Wrap with shrink film exterior; 3. Packed according to customer request.
Advantages/Features	Providing colorful products with various mechanical performances to adapt all kinds of architectural styles

Powder Coated Types:

1: Air spraying method. The powder coating is placed in the spray gun, and the coating is adsorbed on the surface of preheated aluminum profile by the adsorption force of compressed air. The powder is melted on the surface of aluminum profile. Thermoplastic and thermosetting powder can be used. If it is thermosetting powder, it should be solidified in the oven. This spraying method is suitable for the surface of small aluminum profile.

2: Fluidized bed dip coating method. The aluminum profile is preheated first, and then immersed in a powder coating fluidized bed to melt the powder to the surface of the aluminum profile. Thermoplastic and thermosetting powder can be used. If it is thermosetting powder, it should also be solidified in the oven. This spraying method is suitable for small aluminum profile surface with thick film, as well as medium-sized pipes or metal mesh, which can be fully dip coated.

3: Electrostatic powder spraying. This is a widely used powder spraying method at present. It uses the principle of electrostatic adsorption, so that the powder coating under electrostatic induction can be adsorbed on the surface of aluminum profiles with opposite charges. Both hot spraying and cold spraying can be used. After spraying, it needs to be dried in the baking oven. This spraying method is suitable for the surface of aluminum profiles with different sizes and shapes, and uses thermoplastic and thermosetting powders Fine.

4: Electrostatic fluidized bed dip coating method. This spraying method combines the fluidized bed dip coating method and electrostatic powder spraying method, using thermoplastic and thermosetting powder, which is suitable for the mass production of small aluminum profiles with film thickness less than 150 μ M.

5: Electric field corona coating method. The thermoplastic or thermosetting powder is placed between two parallel electrodes to make the powder coating charged, and the coating material is passed through between the electrodes to make its surface absorb the powder. A fluidized bed is placed under the device, and the spraying material is sprayed from the nozzle of the ejector, which is suitable for spraying small aluminum profiles with thin coating (10-20 μ m).

Contact us if you need more details on Thermal Break Aluminum Window Profiles. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Powder Coated Aluminum Windows Profiles、Aluminum Window Profiles. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Aluminum Profiles > Construction Aluminum Profiles