5j1480 Bimetal Alloy Strip for Exhaust Thermometers (Ni22Cr3/Ni36)

Model NO.: 5J1480 Standard: GB Shape: Strip, Roll Application: Utomatic Control Devices and Instrumentation Condition: Bright,Printed Brand: Ualloy Trademark: UALLOY HS Code: 7226999001 Type: Strip Technique: Cold Drawn Surface Treatment: Polished Size: (0.05-3.0mm)T*(>1mm)W Property: Can Replace Kanthal 135 Product Namewith Good Performance as Kan: 5j1480 Bimetal Alloy Strip for Exhaust Thermometer Origin: Hangzhou, China 5J1480 bimetal alloy strip for exhaust thermometers (Ni22Cr3/Ni36)

(Common Name: Kanthal 135,dimpty R80,Telcon 140)

Composition

Grade	5J1480
High expansion layer	Ni22Cr3
Low expansion layer	Ni36

 
Chemical composition(%)

Grade	C	Si	Mn	P	S	Ni	Cr	Cu	Fe
Ni36	≤0.05	≤0.3	≤0.6	≤0.02	≤0.02	35~37	-	-	Bal.

 

Grade	C	Si	Mn	P	S	Ni	Cr	Cu	Fe
Ni22Cr3	≤0.35	0.15~0.3	0.3~0.6	≤0.02	≤0.02	21~23	2.0~4.0	-	Bal.

 Typical Physical properties

Density (g/cm3)	8.2
Electrical resistivity at 20ºC(ohm mm2/m)	0.8±5%
Thermal conductivity, λ/ W/(m*ºC)	22
Elastic Modulus,  E/ Gpa	147~177
Bending K / 10-6 ºC-1(20~135ºC)	14.3
Temperature bending rate  F/(20~130ºC)10-6ºC-1	26.2%±5%
Allowable temperature (ºC)	-70~ 350
Linear temperature (ºC)	-20~ 180

Application: The material is mainly in automatic control devices and instrumentation (eg: exhaust thermometers, thermostats, voltage regulators, temperature relay, automatic protection switching, diaphragm meters, etc.) make temperature control, temperature compensation, current limit, temperature indicator and other heat-sensitive components.
 
Feature: The basic characteristics of Thermostat Bimetallic is bending deformation with temperature changes, resulting in a certain moment.
Thermostat Bimetallic Strip expansion coefficient is different from the two or more layers of metal or alloy along the entire contact surface firmly bonded, having a temperature-dependent shape change occurs thermosensitive functional composites. Wherein the higher expansion coefficient of the active layer is a layer called a low coefficient of expansion of the layer is named passive layer.
 
 
Style of supply

Alloys Name	Type	Dimension
5J1480	Strip	W= 5~120mm	T= 0.1mm

 
 

Contact us if you need more details on Bimetal Alloy Strip. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Bimetal Strip、5j1480 Strip. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Bimetal Strip